WINONE AC25 P
Unleash wall perfection with acrylic-polyurethane brilliance.
WINONE AC25 P - WINGUARD AQUA EXT+ is a top-quality, high-performance coating for building exteriors. It's a single component ready-to-use mix, blending acrylic and polyurethane for strong protection against tough weather. This coating not only decorates but also safeguards exteriors from adverse conditions. With over 200% elongation, it excels at bridging cracks, and it also provides moderate waterproofing. It is better than WINGUARD AQUA EXT due to the PU blend, which increases life and gives better performance.
Problems we solve
- 1.
Weathering and Degradation:
Exposure to harsh weather conditions such as rain, sun, and temperature fluctuations can lead to the deterioration of building exteriors. - 2.
Water Infiltration:
Improper waterproofing or deteriorated sealants can cause water infiltration, leading to moisture damage, rot, and mold growth. - 3.
Fading and Discoloration:
Continuous exposure to sunlight and environmental pollutants can cause paint and materials to fade and lose their original color. - 4.
Efflorescence:
Mineral deposits on the surface due to water migration within the building materials can lead to unsightly white stains and weaken the surface. - 5.
Aesthetic Deterioration:
Stains, dirt, and pollutants can accumulate on exteriors, diminishing the overall visual appeal of the building.
Features
- 1.
Strong Adhesion:
Achieves exceptional adhesion on both concrete and various plaster surfaces. - 2.
Elongation Properties:
Impressive elongation of over 200%, doubling as a moderate waterproofing coating which helps when cracking occurs. - 3.
UV Protection:
Exhibits outstanding resistance to all weather conditions along with UV resistance, preventing color fading by maintaining color stability. - 4.
Anti-Bacterial:
Prevents bacterial growth, ensuring clean and fungus-free walls. - 5.
Breathable Coating:
A breathable formulation prevents peeling due to moisture accumulation. There is no chalking, peeling, or fading.
How to Apply
- 1.
Surface Preparation:
Ensure proper maturation and drying of new cement plaster. For pre-painted surfaces, remove loose paint, seal cracks. Ensure the base is clean, dry, dust-free. - 2.
First Coat:
Primer Application: Apply a coat of WINGUARD PRIMEBOND primer as per instructions. Carry out touch-ups if required. - 3.
Multi-Layer Application:
Apply the first coat of WINGUARD AQUA EXT+. Allow it to dry for 6–8 hours at ambient temperature, and then apply a second coat. - 4.
Drying and Curing:
Allow the final coating layer to dry for 24 hours to achieve complete curing, ensuring the coating's effectiveness and durability
